Countertop Wrapping: Installation Process

Vinyl wrapping is a cost-effective, Versatile, and convenient approach to enhance the aesthetics, functionality, and value of your kitchen countertops without breaking the bank. These wraps are usually made up of thin vinyl films and are found in various colours, designs, and textures catered to the specific needs of various types or styles of kitchens. 

Countertop wrapping can be either done manually or you can also hire a professional wrapping service. However, it involves various time-consuming and crucial steps that demand careful consideration to avoid unnecessary stress and get the desired output. 

If you are first time applying vinyl wraps to your kitchen countertops, you can use this step-by-step guide to perform this job efficiently. 

Select the Right Type Of Wraps 

Vinyl wraps can mimic all types of materials including marble, wood, metal, and concrete, and are found in various colours, shades, and textures. Each type of wrap has unique properties, longevity, and compatibility. Therefore, start the process of countertop wrapping by making the right choice. 

The selection of the right type of wrap can be a challenging task due to the availability of a plethora of options. However, accessing your unique kitchen needs, preferences, and budget constraints can help you make an informed decision. 

You can also seek professional assistance to know what type of vinyl wraps can be an ideal pick for your kitchen worktops. Make sure to choose top-notch wraps that can withstand daily moisture, spills, and heat.  

Prepare Countertops

After the selection of the right type of wraps, the next step is cleaning and preparing countertops because vinyl wraps stick strongly to clean and dust-free surfaces only. Make sure the surface is free from any debris, dust, or dirt, and well prepared to apply vinyl wraps. 

To prepare worktops start removing any sealant present around edges. You can use a silicone remover or a razor blade to remove the old sealant carefully. Now use a mild cleanser, water, and a smooth cloth to remove dust, especially in areas around the sink, hob, and edges. 

It may take some extra time but will ensure better adhesion and smooth application which results in enhancing the longevity of vinyl wraps as well as the aesthetic appeal of countertops.

Measurement and Cutting 

The next step is measuring the countertops and cutting vinyl wraps according to measurements. You can use a tape measure or a large scale to measure all sides of your kitchen countertops accurately. 

Once you have done with measurements, the next step is transferring these measurements to vinyl wraps and cutting. Always use a cutting mat or a sharp knife to cut vinyl wraps smoothly and leave a little extra on each side. 

When measuring and cutting the vinyl wrap, don’t forget to count for additional wrap needed to cover edges and sides. 

Apply Vinyl Wrap 

It’s time to apply the vinyl wrap, the most exciting part of the countertop wrapping project. Start from a corner or a comfortable point, peel back a small section, and apply it to the worktop. When sticking the vinyl down, make sure to smooth it out to avoid air bubbles. 

You can use card paper or a slim piece of wood with smooth edges to remove air bubbles. The best thing is that you can easily lift the vinyl and reapply to remove any air bubbles if present. 

Wrap Countertops Edges 

After applying the vinyl wraps on the countertop surface, now comes the most important step, wrapping the countertop’s sides or edges,  it is crucial to create a polished look. 

You can use a hairdryer to soften the hard or less pliable vinyl, it will make it more flexible and soft that can be easily folded and wrapped around edges. Make sure to smooth out all wrinkles, air bubbles, and excessive material before sealing the edges. 

Don’t rush, take proper time to do this job because the beauty of countertop wrapping mainly relies on finishing. 

Apply Silicone Sealant

The last step of the countertop wrapping process is the silicone sealant application to protect edges and vulnerable areas. It is crucial to avoid early wear or tear and enhance the longevity of the vinyl wraps. 

Make sure to carefully clean the surface and edges again and apply the sealant around the edges of the worktop completely. Gives it a proper time to dry and set completely. 

Bottom Line 

Countertop wrapping is a strategic solution to upgrade your kitchen, enhance its longevity, and bring it a luxurious touch. You can follow this step-by-step guide to do this job perfectly and enjoy the new look of your kitchen without spending a bank of money. 

For a quicker job and professional finishing, you can contact “We Wrap” and hire their expert services to wrap your countertops without going through the stress of manual wrapping.

Share on facebook
Share on twitter
Share on linkedin